Smart solution to guide drivers to the available parking lot easily and quickly.
Video-based Parking Guidance System (VPGS) is PGS solution using video analytics technology. Unlike any traditional PGS solution such as ultrasonic, geo-magnetic sensor, IP camera sensor recognizes the vehicle license plate number on each parking lot
that enables to propose a value-added features of video-surveillance, Find-My-Car, and others by one single platform.
Parking Guidance
Drivers can easily and quickly find the available parking lot simply following guidance displays and LED indicators. Guidance display shows how many places are available by level and zone, and LED indicator shows the availability of the spaces under the indicator.
Find-My-Car
Drivers do not need to remember where they parked the vehicle. Find-My-Car feature shows the route map with the shortest way to get to the location using KIOSK and mobile application
Emergency Support
VPGS has no blind spots surveillances feature even the underneath camera. The installation of the additional CCTV camera system is not required. When emergency arises, the situation can be monitored in center by the camera connected to the emergency bell.
Automatic Operation
Each parking lots can be managed by the operating program. Any specific accessible parking spaces for staff, disabled, and so on can be assigned by dynamic operation feature.
Installed in the middle of driveway on the ceiling to detect cars in parking spaces and recognize license plate number
Omni-directional IP camera sensor uses fish-eye lens which has a 360 degree panorama view. This model is much economical because it covers Max. 6 parking lots for LPR and Max. 12 parking lots for detection concurrently. Also there is no blind spot for security surveillance
One of the strength of this model is its good and unique design. NEXPA thinks the interior design factor too for your parking.
This model is designed to be very easy to install and reduce the installation costs. You can only install IP camera sensor in the middle of driveway on the ceiling. the recommended width of driveway is 6 meters (Max. 8 meters) and installing height is 2300~2400mm.
| Imaging Device | SONY 1/1.7inch 12.4M CMOS |
| Effective Pixel | 4,072(H) x 3,046(V) |
| Scanning Method | Progressive scan |
| Operating Illumination | 20 lux @ F2.4 |
| Electronic Shutter | 37-600137 (unit : micro sec.) |
| Other Functions | High Intensity LED lights, up to 128 programmable colors / WDR / Defog |
| Ethernet | RJ-45 (100/1000 BASE-T) |
| Video Compression | H.264 BP/MP/HP, MJPEG/JPEG Baseline encoding |
| Real-time Multi-stream | H.264 - 3840x2160@30fps + 1080p@30fps + 3840x2160@2fps JPEG snapshot |
| Bitrate Control | H.264 - CBR, VBR, AVBR, FIXQP |
| Operation Environment | Operation temperature / humidity: -10℃ ~ +55℃ / Under 90% RH |
| Power Supply | PoE (IEEE802.3af class3) |
| Electricity Consumption | Approximately 10W |
| IP rate | IP54 |
Installed on the 2 lines of raceway in a corridor to detect vehicles on the opposite side row and recognize license plate number
The embedded LED indicator of uni-directional IP camera shows the availability of the parking lot(s) underneath. Also, the sub LED indicator can be connected to show the each parking lot's status for drivers and guide them much faster.
This model has various types for different site conditions; Type A, B, and LED indicator. Type A is a normal type which has camera and LED indicator. The others only has a camera or a LED indicator for the case that there is not parking lot row on the opposite side.
| Imaging Device | 1/2.3" 12.4M CMOS (Rolling shutter) |
| Total pixel | 4072(H) x 3046(V) |
| Scanning Method | Progressive scan |
| Operating Illumination | 20 lux F1.4 |
| Electronic shutter | Minimum / Maximum (1/12000~1/15 second) |
| Ethernet | RJ-45 (10/100 BASE-T) |
| Video compression | H.264 (MPEG-4 part 10/AVC), MJPEG |
| H.264 | Maximum 15fps@4032*3024 |
| MJPEG | Maximum 15fps@4032*3024 |
| Bitrate control | H.264 - CBR or VBR / MJPEG -VBR |
| Power Supply | PoE (IEEE802.3af class3) |
| Electricity consumption | Maximum 5W |
| LED | 256 color LED drive circuit include |
| Zoom & Focus | Zoom & Focus drive circuit include |
Installed on the 2 lines of raceway in a corridor to detect vehicles on the opposite side row and recognize license plate number
NEXPA's IP camera sensor detects an incoming vehicle and recognizes the license plate number on parking lot. It makes easy and efficient to manage car park with the obtained data. This model detects Max. 3 parking lots.
This model has various types for different site conditions; Type A, B, and LED indicator. Type A is a normal type which has camera and LED indicator. The others only has a camera or a LED indicator for the case that there is not parking lot row on the opposite side.
| Shooting | Trigger / Video |
| Input Voltage | AC220V / 60Hz |
| Camera | Digital CCD 1.3M Pixel |
| Shutter Speed | Auto |
| Recognition Speed | Within 0.8 second |
| Lens | 5 ~ 50mm |
| Lighting | Infrared high brightness LED lighting |
| Recognition Rate | Over 99% (Korea base) |
| Display Board | Module 28mm(W) x 64mm(H) |
Provides "Find My Car" service which helps customers to find the location where their car parked. Customers check the location simply by entering license plate number on KIOSK.
It shows the recognized license number and other information applicable.
| Display | 32 inches |
| Resolution | 1920 x 1680 |
| CPU | Intel Dual Core 2.5Hz |
| Memory | DDR 2G MB Max |
| LAN | 10/100 1 port, 1000 2 ports |
| Average Brightness | 300 cd/m2 |
| Size | 833(W) x 11150(H) x 350(D) mm |
| Input Voltage | AC110 ~ 220V |
| USB | 2 ports / Front 2 ports |
| Serial | 2 ports |
