Vehicle Entrance Control & Perimeter Security Solutions
Secure Innovative Solutions LLP offers fixed bollard options for permanent vehicle-access restriction and perimeter security at commercial, industrial and security-sensitive facilities. Unlike retractable bollards, fixed bollards remain in place to help define and protect designated vehicle boundaries.
The Arjuna fixed bollard range includes Arjuna 4 (Shallow 4), Arjuna 8 (Shallow 8) and Arjuna 12 (Shallow 12). K4, K8 and K12 are shown here as product-range designations only; their appearance on this page is not, by itself, confirmation of an independently verified impact-test classification. Before specifying performance, verify the exact product model, installation configuration, test conditions and certificate scope against the applicable report. Do not assume K and M designations, or classifications under different standards, are interchangeable without supporting documentation.
For project planning, review the required vehicle opening, bollard spacing and placement, foundation and civil-work conditions, underground utilities, surface finish and site security requirements. Confirm technical values against the approved model-specific datasheet and installation drawings.
Based in Ahmedabad, India, Secure Innovative Solutions LLP handles product enquiries for domestic and international projects. Contact our team to discuss the selected model, available technical documentation and project-specific installation requirements.
Compare the Arjuna fixed bollard models below. K4, K8 and K12 identify options as labelled in the product range; these labels do not independently establish a tested rating. Verify the applicable impact-test classification, installation details and technical values for the exact model and configuration before procurement.
Compare the Arjuna fixed bollard models by type and project considerations. Technical classifications and civil-work values should be taken from the documents applicable to the exact model and configuration.
| Feature | Arjuna 4 | Arjuna 8 | Arjuna 12 |
|---|---|---|---|
| Product type | Fixed / permanent | Fixed / permanent | Fixed / permanent |
| Impact-test classification | Verify applicable report or certificate | Verify applicable report or certificate | Verify applicable report or certificate |
| Test standard and conditions | Check the documented standard, test vehicle, impact speed, test conditions and reported classification for the exact configuration. | ||
| Foundation and civil works | Approved drawings | Approved drawings | Approved drawings |
| Operating type | Fixed / non-retractable | Fixed / non-retractable | Fixed / non-retractable |
| Selection considerations | Site security, layout and installation conditions | Site security, layout and installation conditions | Site security, layout and installation conditions |
| Request details | Request Arjuna 4 Details → | Request Arjuna 8 Details → | Request Arjuna 12 Details → |
Important: K4, K8 and K12 are product-range designations on this page and do not by themselves verify an impact-test classification. Confirm the exact test report or certificate for the selected model and configuration; do not infer performance from product names or foundation dimensions.
Need help selecting a fixed bollard for your project? Contact our team →
Fixed bollards are permanently installed barriers used to restrict vehicle access. A crash-test classification should only be stated when supported by the applicable impact-test report or certificate for the exact model and configuration.
K4, K8 and K12 are designations used in the product range. Verify the exact impact-test classification, applicable standard, test conditions and certificate scope for the selected model. Do not assume K and M designations, or classifications under different standards, are interchangeable unless supporting documentation confirms the relationship.
Fixed bollards remain permanently installed and do not retract to permit vehicle movement. Automatic bollards raise and lower to manage authorised access. The operating type alone does not establish crash-test performance.
Fixed bollards may be considered at commercial facilities, industrial sites, controlled entrances, pedestrian areas and security-sensitive locations where permanent vehicle-access restriction is required. Final selection should follow a site-specific assessment and review of applicable product evidence.
Check the applicable test report or certificate for the exact model and configuration. Review the stated test standard, test vehicle, impact speed, test conditions and reported classification or penetration. Do not assume that evidence for one model applies to another model or installation.
Foundation dimensions, excavation requirements, placement and civil-work details vary by model and site conditions. Confirm the approved model-specific installation drawings before construction, and check the location of underground utilities as part of project planning.
Fixed bollards do not retract for routine vehicle access. If the wider entrance includes access-control equipment, confirm the arrangement and compatibility of any associated gates, barriers, sensors or monitoring equipment with the project design.
No. Suitability depends on the specific bollard design, ground and foundation conditions, underground utilities, required performance and approved installation details. Do not assume a shallow foundation dimension applies to every model or guarantees a particular impact-test classification.
Contact Secure Innovative Solutions LLP with the selected model and project requirements to enquire about available datasheets, approved installation drawings and applicable impact-test documentation.
Contact our team to confirm the installation, commissioning, maintenance, spare-parts and technical-support arrangements available for your selected model and project location.
Fixed Bollards for Permanent Vehicle-Access Restriction
Explore the Arjuna fixed bollard range for projects that require a permanent physical restriction at vehicle entrances and perimeter boundaries. Confirm suitability against site requirements and applicable technical documentation.
Explore related solutions: Bollards, Automatic Bollards, Road Blockers and Gates.
Need product guidance? Contact our team with your site layout, required clear opening and intended application.
Fixed bollards are generally selected where a permanent physical restriction is required. Before specifying a model, review the site security assessment, required opening, bollard spacing, ground conditions, underground utilities and installation access.
For models listed under K4, K8 and K12 designations, confirm the impact-test classification and certificate scope for the exact model and configuration. Do not infer performance from a product name, shallow-mount label or foundation dimension alone.
Request the relevant technical datasheet and approved installation drawings to verify materials, foundation requirements and any available test documentation before procurement.
Visit our FAQs or contact our team for product and installation enquiries.
We supply Fixed Bollards, Bollards, Road Blockers, Boom Barriers, Access Control & Perimeter Security Solutions for projects across India and selected international markets. Our listed service areas include major Indian cities such as Ahmedabad, Bengaluru, Chennai, Delhi, Hyderabad, Kolkata, Mumbai, Pune and Surat, alongside other locations nationwide.
We also handle enquiries from international markets across the Middle East, Europe, North America, Africa and Asia. Contact our team to confirm product availability and service arrangements for your project location.
Explore our location list below and contact us to discuss the availability of fixed bollard solutions in your region.
Tell us which fixed bollard model and project requirements you have so our team can review your enquiry.
Plot No. 87, 88 Devraj Industrial Park,
Opp. Gopal Charan Industrial Hub,
Bakrol-Bujrang, Indore Highway,
Ahmedabad, Gujarat 382433, India
